佳能 MP145错误代码和清零方式

Error Code 错误代码）
E2-2 = No paper (ASF)
E3-3 = Paper jam
E4 = No ink（没有墨水）
E5-5 = The ink cartridges are not installed or a non-supported ink cartridge is installed, or the ink cartridges are not installed properly（墨盒未正确安装，或不支持的墨盒安装）
E8 = Waste ink absorber full, or platen waste ink absorber full
（废墨水吸收器已满，或压板浪费墨水充分吸收，清0即可）
E9 = The connected digital camera / video camera does not support Camera Direct Printing（连接数位相机/摄影机不支持相机直接打印）
E14 = The Ink cartridges whose destination are wrong（墨盒，其目的地是错误的）
E15 = Ink cartridge is not installed E16 - Ink remaining is unknown
E16 -E19 = Failed to scan head alignment sheet
E22 = Carriage error
E23 = Paper feed error
E24 = Purge unit error
E25 = ASF(cam) sensor error（凸轮传感器错误）
E26 = Internal temperature rise error（内部温度上升错误）
E27 = Waste ink absorber full or platen waste ink absorber full
E28 = Ink cartridge temperature rise error -
E29 = EEPROM error
E33 = Paper feed position error
E35 15 = USB Host VBUD overcurrent error - USB（USB主机VBUD过错误- USB接口）
E37 17 = Abnormal motor driver error
E40 20 = Other hardware error
E42 22 = Scanner error（扫描错误）

MP145清零方法
A、先按着stop/reset键，然后按POWER键开机。
B、按POWER键不放手的同时，松开stop/reset键，然后再双击stop/reset键。
C、同时松开POWER健和stop/reset键，此时进入维修状态。
D、待电源灯变绿时，按stop/reset键去选择设置功能
E、按４次stop/reset警告灯熄灭　在按电源按钮一次　　ＯＫ！！